I
n the Garage AG – Zumikerstrasse 24, Zollikon 8702 Switzerland (V. 22/3/21)
3 / 6
7.
Connect the electric cable to the
Air Pump
and plug it into an appropriate electrical outlet. For the
Outdoor version, ensure that the power adapter and pump are placed
inside
the Ultimate Car Shield.
8.
Turn on the
Air Pump
using the red 0/1 switch.
It will run for less than 5 minutes or until the optimal
pressure is reached and will maintain that pressure without intervention
Notes:
•
This system allows constant maintenance without any user intervention in the event of pressure
drops common to all inflatable products
•
You may need to assist the device by lifting the pillars during inflation to ensure a smooth rise. If it
is not fully inflated at five minutes, turn off the pump and unfold any portions which may be blocked
or stuck together
•
For the indoor versions, you can choose to locate the Air Pump inside or outside the Ultimate
Car/Bike Shield as there are two sets of identical valves. The Air Pump and adapter must be inside
for the Outdoor version
WARNING! Do not overinflate or interfere with factory-set the pressure settings. Maximum inflation:
2.56PSI/0.17 Bar for Ultimate Car Shield &1.91PSI/0.13 Bar for Ultimate Bike Shield