
35
34
•
The manual buttons are located at the bottom right of the unit.
• Press “LIGHTS ON / OFF” to switch both the flame light and the mood light
on or off at the same time.
• Press the “FLAME” button to select the colour of the flame (three types)
or to return to the OFF position.
• Press the “MOOD LIGHT” button to select the colour of the mood light
(13 types), the colour cycle mode or the return to the OFF position.
• Press the “FUEL BED” key to select the LED light in the base tray (13 types),
the colour cycle mode or the return to the OFF position.
2. MANUAL CONTROL PANEL
BASE TR AY LE D LIGHT
MAIN SWITCH ON / OFF
MOOD LIGHT
NOTE: The manual buttons control basic functions, but not all operating
controls. To perform all functions, use the remote control.
FL AME PICTU RE
LIGHT ON / OFF
HE ATING INDICATOR
RESE T
BUT TON
3. REMOTE CONTROL
NOTE: The remote control of the unit loses the memory for all function
settings when the switch is set to OFF. If the remote control is empty
or if you change the batteries, only the flame function loses its memory
and the timer settings are not affected. However, the clock may need
to be adjusted.
NOTE: This is a thermostatic remote control. The remote control should
be in the same room as the fireplace and lie on a flat surface. The
remote control must be placed away from the fireplace so that hot air
does not affect the thermostatic reading.
DISPL AY
MODE
HE ATING/
PROGRESS
LE D LIGHT
BASE TR AY
TIMER
TE MPE R ATU RE SE NSOR
POWER
FL AME E FFECT
MOOD LIGHT
BAT TE RY
POWE R
HE ATING PE RIOD
ROOM
TE MPE R ATU RE
16:58 Mon
TIME AND WE E K
PROGRESS
TIMER
SE T
TE MPE R ATU RE
EN
EN