IMV VM-5011A, Инструкции по эксплуатации

Страница: 22 / 22

－ 22 －
VM-5011A Instruction Manuals
(TVE-6-4188E / Version 1.20)
Appendix.4 About Magnet (Sensor mounting options)
A magnet for attaching the VP-100 and VP-8021A to the measurement point is available
as an option (see Table.A-5 and Fig.A-6).
Table.A-5 Sensor Mounting Magnet
Model
Mounting
Surface
Material
Adsorption
Force
Outer
Dimensions
MH-205R Flat Surface Steel Approx. 160N See Fig.A-6
MH-206R Curved Surface SUS Approx. 150N See Fig.A-6
13
φ25
M6(P=1) Depth 7.5
23
φ25.5
M6(P=1) Depth 9
MH-205R MH-206R
Fig.A-6 Outer Dimensions of Magnet (Unit: mm)
Cautions
The adsorption force of magnet is very strong, even if it is installed to the sensor mounting
surface from a very short distance, a large impact will be applied to the sensor.
Sensor may break down due to a large impact, so once you touch the end of
magnet to the mounting point, keep your hands on it and install it quietly.
Note
The adsorption force of magnets decreases due to deterioration over time.
Sensor may detect a large impact or vibration that occurs when it falls off the
mounting surface due to a decrease in adsorption force.
In addition, sensor may be damaged due to the impact or vibration when it is
dropped. So, it is recommended to use screws to fix sensor when it is always
installed and monitored vibration.