Instruction manual
www.imv-imaging.com | 11
4. Connection of peripherals
The Imago equipment can be connected to several peripherals:
5. Cleaning and disinfection instructions
5.1 Cleaning and disinfection of the device
The following disinfection solutions have been tested and their
compatibility with the components of the device has been proved:
•
Cidex
•
Cidex plus
•
Cidex OPA
It is recommended to use one of these solutions to avoid any
deterioration during the cleaning and disinfection process. Using
any other solution other than those indicated as it may damage
components of the scanner.
5.2 Cleaning and disinfection of probes
The following disinfection solutions have been tested for their
compatibility with the components of the probes:
•
Alkazyme
•
Klenzyme
•
Cidezyme
•
Nu-Cidex
•
Anioxyde
•
Gigasept-FF
•
Steranios
•
Cidex OPA
It is strongly recommended to use one of these solutions in order
to avoid any deterioration during the cleaning and disinfection
procedure.
!
Warning:
Do not pour liquid directly on to the scanner.
Before closing the case, ensure the scanner and
probe are dry.
6. Environmental conditions of use
The device is designed and tested be operated within this range of
temperature:
•
-20°C to +60°C during transportation and storing
•
-10°C to +40°C during operation.
To preserve battery life, the system should be stored with a charge
of between 15-50% and at a room temperature of 30°C (86°F).
Turn
On/Off
Charge
Led
Battery
Charge
Power
Supply For
Goggles
Composite
Video
USB
Port
Bluetooth Port
