IMT IQL Albireo Floodlight, Руководство пользователя

Страница: 3 / 12

User Manual
IQL® Albireo Floodlight
User Manual
IQL® Albireo Floodlight 3 Version 5.1 201302
1. Safety
In order to use the product safely and optimise the life of the product, the following instructions must be
observed.
Only qualified personnel may install the product.
Work in accordance with locally applicable safety standards and regulations.
Ensure that there is no mechanical load applied to the light fitting during installation.
If excessive tension is applied to the mounting feet during installation, such as when mounting on an
uneven surface, the spot welds on the mounting feet can be torn free from the light fitting.
Use all the mounting holes when installing the light fitting.
Ensure that the cable gland is suitable for the dimensions of the type of cable that will be connected.
This is necessary to ensure the IP protection.
Ensure that the cable gland used has an IP level of IP66, IP67 or IP68 in conformance with EN 60529,
and in case of an explosion proof lighting fixture, is Ex-e certified according to IEC 60079-7.
When using metal glands, use an earthing plate and locknut on the inside of the junction box.
Ensure there is a reliable connection to the earthing system, both with the external earthing point and
with the connection in the light fitting junction box.
Never open the light fitting housing.
Do not clean the light fitting with a high pressure steam or water jet. This will avoid damage that falls
outside the guarantee terms.
2. Warranty
2.1 General
The guarantee on the IQL®-FL series is only applicable when the light fitting is used within the operational
limits.
Operational limits are:
The minimum and maximum ambient temperature for the IQL®-FL is -40°C to +40°C.
The light fitting must be installed by a qualified person and in compliance with the installation
instructions.
Damage caused by incorrect installation, accidents or external influences such as lighting strike and
harmonic distortion in accordance with EN 50055 are not covered by the guarantee.
The lighting level of the light fitting depends on the temperature and is therefore not covered by the
guarantee.
If an IQL®-FL fitting fails within the warranty period, IMT B.V. will supply a new fitting with a comparable
specification free of charge. Before the guarantee can be confirmed, a defective light fitting must be sent to
IMT B.V. at the user’s expense for inspection. After this inspection the user will be informed of the result(s).
See invoice for individual guarantee agreements.
2.2 Life span
Switching the light fitting with a semiconductor photoelectric cell or a semiconductor relay has no known effect
on the life span of the light fitting.
It is expected that more than 70% of the original illumination power will be retained after 80,000 operating
hours