IMT CAS2545, Руководство по эксплуатации и обслуживанию

Страница: 13 / 72

Section 1 Compressor Introduction 11
CAS2545 System Description & Specifications
The IMT CAS2545 air compressor is a single-stage, air-cooled, rotary screw, pressure
lubricated, hydraulically driven unit designed for mobile or industrial applications. The
compressor provides high pressure air for use in air tools, tire service trucks, and other mobile or
stationary compressed air needs.
The compressor includes an oil-flooded, rotary screw-type design, a compressor inlet system, a
capacity control system, a lubricating oil system, and a discharge system in addition to basic
instrumentation. The instrumentation includes a temperature gauge, an hourmeter, a hi-temp
warning indicator, an oil level sightglass, and an air restriction indicator. All instrumentation is on
the front panel of the compressor. The air delivery rate of the unit is 45 cfm at 100 psi.
CAUTION
Operating the compressor at pressures above 150 psi will shorten the service life and void the
product warranty.
The unit has openings for cooling air intake on each end. Free airflow on all sides is desirable.
The front and rear of the compressor cannot be blocked.
SPECIFICATIONS
Power Source Hydraulic motor
Dimensions 20" W x 33" L x 24.5" H
Delivery See performance charts.
Cooling Oil cooler
Fan Diameter 16"
Operating Speed See performance charts.
Lubrication Oil pump
Oil Capacity 3.75 quarts
Max. Compressor Oil
Temp. 240° F
Max. Hydraulic Oil Temp. 180° F
Weight
290 lb wet
Normal Flow (gpm) See charts.
Normal Operating
Pressure 1850 psi
Maximum Pressure 2400 psi
Ambient Operating
Temp. 0° - 120° F
* Add 2-5/8" to height for air filter cap.
Specifications subject to change without prior notice.