IMS SPOT 14500 TRAFO, Руководство пользователя

Страница: 12 / 32

12
SETTINGS MODE :
GLUE MODE :
In the SETTINGS menu shown above, a specific mode can be selected in case there is glue in between the steel sheets to
be welded. In this case, a GLUE mode can be switched ON or OFF in this menu. If the GLUE mode is activated, a pre-spot is
performed prior to the welding spot. The duration of this pre-spot is selected in milliseconds, from 0 to 400ms, by
increments of 50ms. When this mode is selected, the text « GLUE » appears in the welding modes STANDARD, MANUAL,
MULTI, GYSTEEL.
Use of the single sided gun
-
Connect the copper plate onto the generator's earth cable.
-
Firmly fix the earth plate as near as possible to the welding area.
In case of spot welding with the single sided gun, always fix the earth plate to the sheet that will not come into contact with
the welding electrode (so that the welding current will flow through the 2 sheets to be welded).
-
Select the GUN tool using the key, or by pressing the gun trigger.
-
The standard mode with 'star welding' is launched by default.
-
The gun can be used in both standard and manual modes.
-
In manual mode, the maximum permitted welding current is 9 kA
during a period that will not exceed 600 ms, it is therefore impossible
to select higher values for these parameters.
Set the generator entering the metal sheet thicness to weld with the
keys + and -. It is possible to midify the parameters current and time
in manual mode.
-
In standard mode, the gun can weld a maximum of 1.5mm thick
sheets.
When using the gun, the operator can choose between several tools
(single spot, carbon shrinking, star welding, studs, rivets, washers,
stitches). The tool selection is made with + and - keys.
The SETTINGS mode can be accessed by pressing the
MODE key during more than 2 seconds.
The language of the menus can be selected on line 1.
The date and time can be entered on line 2.
The GYSTEEL, CAR MANUFACTURER, AUTO and ENERGY
modes can be also be disabled in this menu.