IMS 8072A, Инструкция по эксплуатации

Страница: 6 / 17

165910 Dew Point Meter 8072A Manual
5
June 2014
POWER SWITCH Turns monitor ON and OFF.
ALARM SWITCH Enables local audible alarm when dew
point exceeds the alarm set point.
LINE CORD Provides connection to power.
BEEPER (not
shown) Gives audible signal when the measured
dew point is above the alarm set point.
DEW POINT
CONDITION
INDICATORS Green light is on when dry air is detected,
red light is on when measured dew point is
above the alarm set point.
SAMPLE TUBING Six feet of heat resistant tubing draws in
process air to be measured.
AIR FILTER Installed in-line with sample tubing,
removes fine particulates from sample air.
DESICCANT TUBE Provides dry air for testing the monitor’s
response.
TUBING STORAGE
BRACKET Allows storage for sample tubing and
desiccant tube when not in use.
ANALOG OUT 4-20mA and 0-5V output for remote
monitoring or data logging. Mates with
standard 3 pin M8 female cable.
NOTE: The 8072A is shipped with a desiccant pack which can
be discarded when the unit is unpacked. The desiccant pack is
different than the Desiccant Tube.