Impex MARCY JX-663SW, Руководство пользователя

Страница: 19 / 27

DECK LUBRICATION
The treadmill is pre-lubricated. However, it is
recommended to check the lubrication of the
treadmill regularly, to ensure an optimal operation
of the treadmill.
After every 2 months of operation, lift the sides of
the treadmill and feel the surface of the belt, as far
as possible. If traces of silicon spray are found,
lubrication is not necessary. In case of a dry
surface, refer to the instructions below.
Only use 100% silicon oil to lubricate your
treadmill deck.
To apply lubricant on the belt

Position the belt so that the seam is located in
the middle of the plate.

Lift the belt at one side and hold the spray
valve at a distance of approximately
6” (15cm
) to the front end of belt and plate.Then spray
from front to the end. Repeat this process on
the other side of the belt. Spray each side for
about 4 seconds.

Wait for 1 minute to let the silicon spray
spread, before starting the machine.
CLEANING
Regular cleaning of the belt ensures a long
product life.

Warning: The treadmill must be turned off to
avoid electric shocks. The power cord must be
pulled out of the socket, before starting the
cleaning or maintenance.

Caution: Do not use any abrasives or
solvents. To avoid damage to the computer,
keep any liquids away. Do not expose the
computer to direct sunlight.

After each training : Wipe the console and
other surfaces with a clean soft and damp
cloth to remove sweat residues.

Weekly : To make cleaning easier, it is
recommended to use a mat under the
treadmill. Shoes can leave dirt on the belt that
can fall beneath the treadmill. Clean the mat
under the treadmill once a week.
STORAGE
Store you treadmill in a clean and dry environment.
Ensure the master power switch is off and is
un-plugged from the electrical wall outlet.
18