Impex MARCY DIAMOND ELITE SM-1050, Руководство пользователя

Страница: 10 / 21

STEP 4 (See Diagram 4)
A.) Attach Safety Hook (#14) to the two Lower Safety Stop Frames (#13). Secure each Safety
Hook with one M10 x 2 3/8” Allen Bolt (#32), two Ø ¾” Washers (#38), and one M10
Aircraft Nut (#37). Turn and attach the Safety Hooks into the selected holes on Left and
Right Upright Beam (#1 & #2).
B.) Turn and attach the hooks on the Lifting Sleeve (#8) into the holes on Left and Right
Upright Beam (#1 & #2).
C.) Place the Lifting Sleeve (#8) in between the two Safety Stop Frames (#12). Align the
holes; insert the Weight Bar (#11) from outside of one Safety Stop Frame through the
Lifting Sleeve to the other Safety Stop Frame on the other side.
D.) Attach two Weight Bar Sleeves (#19) onto the Weight Bar from both ends. Attach two
Spring Clips (#18) to the Sleeves.
E.) Attach two Weight Posts (#9) into the holes on Left & Right Rear Support (#4 & #5).
Secure each Weight Post to the Support with one M10 x ¾” Allen Bolt (#31) and one Ø ¾”
Washer (#38). Slide two Weight Post Sleeves (#20) to the two Weight Posts. Attach two
Spring Clips to the Sleeves.
DIAGRAM 4
9