IMPETUS iT 4500, Руководство пользователя

Страница: 15 / 16

Mode Selection:
BODY FAT MODE: Press < Mode> three times, mode code is 'FAT'.
Operation Instruction:
1. Press <Enter> to set gender, age, height, and weight; the console display blinking during the
setup, use <Speed +> and <Speed -> key to adjust the value and press <Enter> to confirm;
2. After the setup is complete, press <Start/Stop> will start to check your pulse, by holding the
hand pulse sensors with both hands to check pulse, your body fat percentage, body mass
index (BMI), body metabolic rate (BMR) and the related profiles will be displayed within
seconds; to press <Start/Stop> start workout.
3. Console displays 'Err5' when pulse detection failed; Press <Start/Stop> to check again, press
any other key to exit if you do not want to check the pulse.
G e nd er Ag e H ei gh t W ei gh t D o ne
M a le( 1) ; F em a le( 0) 1 0~ 99 11 0~ 25 0 1 0~ 20 0
Sta ndby Che ck P ulse
E nt er Ent e r E nte r E nte r Ent er
7. Workout Profiles
SPEED MODE INCLINE MODE MIXED MODE
Note 1: what the value means: A=10, B=11, C=12, D=13, E=14, F=15;
Note 2: P1~P9 is SPEED MODE, P10~P14 is INCLINE MODE, and P15~P16 is MIXED MODE.
8. Troubleshooting
Problems Possible Reasons Solutions
1. Safety key not plugged In 1. Plug in;
2. The plug or wires got loose 2. Well plug in the plug and wires
3. Power supply not well connected or not power on 3. Turn on the power supply
4. Controller damaged 4. Replace controller;
1. Hand pulse steel plate damaged 1. Replace sensor component or unplug and try again
2. Hand pulse sensor no good 2. Moisturize or rub your hands to try again
3. Wireless sensor no good 3. Replace wireless chest belt battery
1. No speed detect for 8 seconds 1. Well plug in the plug and wires
2. Sensor stick not sensitive enough 2. Shorten the distance between sensor stick and magnet
3. Damaged sensor stick or broken wire 3. Replace sensor stick or wire
4. Motor not running 4. Well connect the wires or replace controller
1. EEPROM does not well plug in 1. Unplug and plug in the IC again
2. EEPROM damaged 2. Replace EEPROM or IC
1. No incline reading 1. Well plug in the plug and wires
2. Incline motor malfunction 2. Replace incline motor
E4 1. Incline indicator incorrect 1. Adjust the VR signal line to right position
E5 1. Body Fat mode shows no pulse 1. Moisturize or rub your hands to try again
No Display;
No Motion
No Pulse
Reading
E1
E2
E3
Please consult your dealers if you still have issues.
6.3 Body Fat Mode
Mode Indicator
Profile BMR
BMI
Body Fat Percentage
Type
SPEED MODE INCLINE MODE MIXED MODE
15