Imperial Cal Products, Inc.
Read Before Starting Installation! Inspect your range hood prior to installing! Any cosmetic
defects must be reported to us prior to installation. Once this hood is installed, ICP will
NOT accept any responsibility for any cosmetic blemishes, scratches or dents in the Can-
opy. Save all original packaging if you wish to return for any reason!
FIRST:
Check your local building and electrical codes.
WARNING:
To reduce the risk of fire or electrical shock, Do Not use any two speed motor units with a Solid
State control devise.
CAUTION:
To reduce the risk of fire or personal injury and to properly exhaust air, be sure to duct air to the
outside. DO NOT vent exhaust air into spaces within wall, attics, ceilings, crawl spaces or garages.
For general ventilation use only. Do not use to Exhaust Hazardous or Explosive Materials and
Vapors. When venting to the outside make duct run as short and straight as possible.
Avoid
using elbows if at all possible as this will reduce your performance.
If elbows are used, we
recommend that the first elbow is 24” from vent opening on the hood (minimum of 12”) and at least
24” between it and the next elbow. We strongly recommend no more then two 90 degree elbows
in any duct run.
Every elbow will decrease the performance and we will not guarantee the
effectiveness of the range hood.
No Performance Warranty when used above BBQ Style Grills.
DO NOT use duct pipe smaller than the outlet duct opening on the hood, this will reduce
performance and void the warranty. DO NOT use flex ducting. Also, use either a Roof Cap or
Wall Cap to end run. Be sure that all joints are taped securely in place. It is essential to have the
proper distance between the bottom of the range hood and the cooking surface below. In most
cases the cooking appliance manufacturers specifications will establish the fire safe minimum
distance required, although there are other factors to consider:
Local Building Codes
Cross directional air movements ie: open windows, air conditioning/heating outlets, cooling
fans, etc.
Overall size of the cooking appliance and surrounding countertop surfaces.
Range hood model selected.
For best performance, distance between cooking surface and the bottom of the hood is 30” and
36”. Check local codes and appliance specifications. Keep in mind, increasing the distance will
decrease the performance.
PS1 is equipped with a thermostat. Unit will automatically turn on
to the
high-
est
setting when 130
degrees is reached. (Not avail-
able in SD4 or SD2
models)
PARTS INCLUDED:
DISCLAIMER
Imperial assumes no liability regarding the improper installation or misapplication of its products. It
is the installer’s responsibility to check for proper installation. Under no circumstances will Imperial
be liable for any labor charged or travel time incurred installation of its products. Damage caused
by improper installation is the installers responsibility and Imperial assumes no liability.
(2)
Large Aluminum Mesh Filters
(2) Smaller Aluminum Mesh Filters
(4)1-1/4 Fender Washer
(4) 10-32 2” Sltd. Round Screw
(4) 10 F/W Stand Washer
(4) 10-32 Wingnuts
WARNING: This product can expose you to certain chemicals, which are known to the State of California to cause
cancer or birth defects or other reproductive harm. For more information to go: www.P65WARNINGS.ca.gov.
Содержание 3000PS1
Страница 15: ......
