11
ENGLISH
FRANÇAIS
ESP
AÑOL
POWERING ON AND ADJUSTING THE IMAGE
Make sure that all of your video and audio
cables are connected and any USB or SD de-
vices have been inserted. Then, power on the
projector by pressing
power
on the projector
or the remote. The power indicator light will
turn green. After powering on, use the
angle
adjustment knob (1)
(if table mounted) to
lower or raise the projector's angle as needed
so that it hits the right area of the projection
surface. You'll then want to focus the image
by rotating the
focus
knob
(2)
. Depending
on the size of the projection, the edges of the
image may be less sharp than the rest of the
image. This is normal.
If the image is projected at a vertical angle, it
may be wider at the top or bottom (referred to
as a trapezoidal shape). In this case, use the
keystone (3)
knob to adjust the image.
POWERING OFF
To power off the projector, simply press
POWER
twice. After the first press, you will see
a prompt saying that pressing power again
will turn the unit off and that any other key will
cancel the power-down.
Place the lens cover
on the projector when it is not in use.
BASIC OPERATION
INPUT SOURCE
AV
HDMI1
HDMI2
VGA
DVD
Media Player
OK
Press the
SOURCE
button to display the Input Source Menu.
Press ▼ / ▲ or
SOURCE
button to select the input source, then
Press
OK
to select it.
You can press
EXIT
to quit the Input Source menu.
1
2
3
