www.impact-test.co.uk www.impact-test.com www.impact-testsets.co.uk
3. Machine Setting
This section should only be used by authorised persons. In this section you can
define new devices and sensors to the console’s input – outputs. You can also adjust the
parameters of defined devices.
Here you can adjust each machine separately
Limits:
The user can define limits for healthy test environment and results.
Minimum Control:
This set value indicates minimum boundary of control.
Maximum Control:
This set value indicates maximum boundary of control.
Maximum Load:
Indicates the maximum load boundary.
Minimum Output:
Minimum working limit
of motor speed.
Maximum Output:
Maximum working limit
of motor speed.
Acceleration:
To Adjust machine acceleration.
Controller:
Controller equipped with double closed loop PID controller and all P, I, D values
should be set for each device. These parameters are defined as a factory default. In order to
adjust these settings please contact with our engineering team.
Analog Output:
Motor command and control signal selection for motor drive.
Analog Input:
For load channel selection
