impact CE310, Руководство пользователя

Страница: 7 / 15

CHAPTER 3 INSTALLATION
DANGER
Consult chapter “DANGEROUS PARTS AND RESIDUAL RISKS” before
proceeding .
3.1 LIFTING
The instructions
in
this section must be
followed
during the transport
ation
of the appliance
and
in
the
following
situations:
• Li
fting and the storing
• F
irst installation
• F
urther installations
The machine is usually supplied
full
y package
d
.
ATTENTION
A
void impact and t
ipping the equipment
.
ATTENTION Protect the machine from atmospheric agents. Water and humidity could oxidise
it,
causing
serious
damage
.
3.2 UNPACKING
After removing the packag
ing
, check that a
ll
parts of the machine are not damaged. In case of doubt, DO
NOT USE THE MACHINE and
refer to
the
supplier
.
DANGER
M
aterials used for packag
ing
(plastic, polystyrene, screws, nails, wood etc.)
must
to be kept
away
from children. They must be
disposed of according to
local regulations
.
ATTENTION
Avoid impact and tipping the equipment.
ATTENTION Before
disposing of
packag
ing
,
check
that any accessor
ies
, manuals,
documents,
or
spare parts are not inside.
3.3 INSTALLATION
The machine has to be placed in an environment suitable for
its designed purpose
(in a
laboratory protected
from
atmospheric agents).
A s
killed operator must
be responsiblre for
installation.
PERMITTED
TEMPERATURE
RANGE
+ 5°C to + 40°C
PERMITTED
HUMIDITY
RANGE
30% to 95%
MAX. HEIGHT OVER SEA
LEVEL
1000 m
GENERAL WARNINGS
•
The machine must be installed so that it is free
ly accessible
from each side in order to be able to carry out
maintenance operations.
6
• No authorised persons and no dangerous objects must be near the machine.