impact BA112 Скачать руководство пользователя

Страница: 25 / 26

© Adam Equipment Company 2004

Manufacturer’s Declaration of Conformity

This product has been manufactured in accordance with the harmonised European standards,

following the provisions of the below stated directives:

Electro Magnetic Compatibility Directive 89/336/EEC

Low Voltage Directive 73/23/EEC

Adam Equipment Co. Ltd.

Bond Avenue

Denbigh East Estate

Milton Keynes, MK1 1SW

United Kingdom

FCC COMPLIANCE

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. The

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

Shielded interconnect cables must be employed with this equipment to insure compliance with the

pertinent RF emission limits governing this device.

Changes or modifications not expressly approved by Adam Equipment could void the user's authority

to operate the equipment.

Содержание BA112



























Результаты поиска

Содержание BA112

Отзывы:

Похожие инструкции для BA112

Бренды по названию

Популярные бренды

impact BA112, Руководство пользователя

Результаты поиска

Содержание BA112

Отзывы:

Похожие инструкции для BA112

Бренды по названию

Популярные бренды