impact BA112, Руководство пользователя

Страница: 14 / 26

© Adam Equipment Company 2004
10
6.5 PARTS COUNTING
•
Before beginning, tare the weight of any container that will be
used, leaving the empty container on the scale.
•
Press the [Func] key to begin. The scale will show " " asking
for a sample size of 10 parts. Change the sample size by
pressing the [Tare/ ] key. The display will cycle through the
options: 10, 20, 50, 100, 200 and back to 10.
•
Place the number of samples on the scale. The number should
match the options for parts counting, i.e., 10, 20, 50, 100 or 200
pieces.
•
Press the [Zero/Enter] key when the number matches the
number of parts used for the sample. As more weight is added,
the display will show the number of parts (pcs).
•
Press the [%] key to display unit weight (g/pcs or lb/pcs), Total
weight (kg or lb) or the count (pcs).
•
Press [Func] to return to normal weighing.
•
‘lb’ will be shown on the CBWa scales when weighing unit is set
to pounds.
6.6 CHECK-WEIGHING
Check-weighing is a procedure to cause an alarm to sound when the
weight on the scale meets or exceeds the values stored in memory.
The memory holds values for a high limit and a low limit. Either or
both the limits can be used.
6.6.1 Setting up Check-weighing while weighing
•
Press the [Limit] key. The display will show the current High Limit
with the left most digit flashing and the HI symbol on the left of the
display.
•
To change the value shown press [%/ ] and to select the digit to
change press [Limit/ ]. Use [Tare/ ] to increment the flashing
digit. When the desired value is shown press [Zero/Enter] to
accept the value. If you want to reset the value to zero, press the
[Func/C] key to clear the value.
•
After pressing the [Zero/Enter] key the display will then show the
Low Limit, the “LO” symbol will be on to the left side of the
display. Enter the low limit in the same way the high limit was
entered.