impact ATOM ME-100, Инструкция по эксплуатации

Страница: 9 / 10

Mounting the Clamp
1. With the handle of the Atom Clamp facing
you, loosen the clamp by turning the handle
counterclockwise.
2. Identify the male thread on the item you wish to
mount to the Atom Clamp, and match it up with
the corresponding 3/8˝ or 1/4˝ female thread on
the Atom Clamp. Mount the item by screwing it
in clockwise until it is secure.
3. Set the jaw grip of the Atom Clamp around
the surface to which you want to mount it,
and tighten the clamp by turning the handle
clockwise.
Repositioning the Handle
1. To reposition the handle without loosening
or tightening the clamp, hold the body of the
Atom Clamp steady with one hand.
2. Using your other hand to hold onto the base
of the handle, pull the handle away from the
body of the Atom Clamp.
3. While still pulling the handle away from the
body of the clamp, rotate the handle to the
desired position and then release.
Note: Make sure everything is secure before
proceeding.
ONE-YEAR LIMITED WARRANTY
This IMPACT product is warranted to the original purchaser to
be free from defects in materials and workmanship under
normal consumer use for a period of one (1) year from the
original purchase date or thirty (30) days after replacement,
whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to
repair or replacement, at the provider’s discretion, of any
product that fails during normal use of this product in its
intended manner and in its intended environment. Inoperability
of the product or part(s) shall be determined by the warranty
provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of
equivalent quality and function.
This warranty does not cover damage or defect caused by
misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED HEREIN,
THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specific legal
rights, and you may also have additional rights that vary from
state to state.
To obtain warranty coverage, contact the Impact Customer
Service Department to obtain a return merchandise authoriza-
tion (“RMA”) number, and return the defective product to
Impact along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own
risk and expense.
For more information or to arrange service, visit www.impact-
studiolighting.com or call Customer Service at 212-594-2353.
Product warranty provided by
the Gradus Group.
www.gradusgroup.com
IMPACT is a registered trademark of the Gradus Group.
© 2017 Gradus Group LLC. All Rights Reserved.