5
ATTACH
the left and right top arms to their
respective lifting columns using four (4) M6 machine
bolts for each top arm. Make sure the top support arms are
facing outwards.
Do not tighten these bolts all the way.
3
ATTACH ARMS TO LEGS
FOR THIS STEP
EXTEND
the base to the appropriate width, so
that the holes in the base are aligned with the recessed nuts
on the table top. Secure the base to the table top with the
appropriate machine screws. You may now tighten the top
arm screws from Step 3.
4
ATTACH BASE TO TABLE TOP
FOR THIS STEP
R
R
L
L
R
L
x3
x3
use the smaller hex wrench for the
set screws
not provided
the four (4) set screws
are located on the
bottom of the crossbars