10
AFTER
connecting all the cables and testing that
the desk is working properly, you may want to use the
supplied self-adhesive cable guides to tidy up the cables
for a cleaner appearance.
13
FINAL TOUCHES
FOR THIS STEP
ATTACH
each rubber keyboard bumper to
the keyboard platform by fitting a carriage bolt
through each of the two slots cut into the platform so that
the bolt’s head is flush with the underside of the platform.
Secure each bumper in place by using your hand to twist
the rubber bumper of the bolt over the screw threads.
12
ATTACH RUBBER BUMPERS
FOR THIS STEP
2x
2x
on the bottom of the platform,
put the carriage bolts through
the slots.
twist the rubber bumpers over
the bolts until they are secured
this is what the keyboard
platform should look like from
your perspective after you’re
done.
TROUBLESHOOTING
IF
one side of the Omega Denali is rising up or down but not the other, check that the drive shaft is connected to both legs.