Bambino
6
3. Connect the USB Receiver
After your computer has rebooted and logged into the desktop, the software
installation wizard will continue. If not, do the following:
If you are installing from the CD-ROM:
o
Click on Start, and then My Computer or Computer.
o
Right-click on the CD or DVD drive icon, then click on Autoplay.
If you are installing from downloaded software from our website:
o
Go to the location of the files extracted from
Bambino
Installation.exe
. The default location is
C:\ImogenStudio\Bambino\
, unless you specified a different
directory.
o
Double-click on
setup.exe
.
When prompted by the software installation wizard, plug the USB receiver into
an available USB port and proceed as instructed.
Note:
Setting the USB receiver antenna at 90° will usually yield
the best results. Start with the antenna at this position,
and if the signal is still poor, adjust accordingly to achieve
a clear line of sight between the USB receiver and camera.
The antenna can be rotated 315°.
WARNING
Rotating antenna beyond the stopper (315°)
will cause permanent damage.
