Immergas RAPAX 300 ERP, Предупреждения и инструкция

Страница: 48 / 56

48
5-2
5-3
5-5
5-4
Remove the rear cover of the heat pump
Caution: always disconnect the appliance from
the power before starting work.
Note:
This operation is only needed for complex
operations: (cleaning evaporator, working on fan,
working on compressor, etc.).
Attention: it is essential to disconnect the power
cable on the terminal board, so that the rear cover
of the heat pump can be removed (Fig. 5-2).
Remove the five screws from the cover with a
screwdriver (Fig. 5-3).
Access to the auxiliary electric unit of the
water heater.
Caution:
always disconnect the appliance from
the power before starting work.
Remove the screw at the back of the remote con-
trol with a screw driver and lift the casing panel
to take it out of its housing (Fig. 5-4).
Remove the screw with a screw driver and gen-
tly lift the cover off to take it out of its housing
(Fig. 5-5).