Immergas MINI NIKE X 24 3 E, Инструкция по эксплуатации

Страница: 19 / 36

19
2-1
INS
TALLER
US
ER
MAINTEN
AN
CE TECHNI
CI
AN
2
INSTRUCTIONS FOR USE
AND MAINTENANCE
2.1 CLEANING AND MAINTENANCE.
Attention: the heating systems must undergo
periodical maintenance (regarding this, see
the section dedicated to the technician, relative
to “yearly control and maintenance of the
appliance”) and regular checks of energy
efficiency in compliance with national, regional
or local provisions in force. This ensures that
the optimal safety, performance and operation
characteristics of the boiler remain unchanged
over time.
We recommend stipulating a yearly cleaning and
maintenance contract with your zone technician.
2.2 GENERAL WARNINGS
Never expose the wall-mounted boiler to direct
vapours from a cooking surface.
Use of the boiler by unskilled persons or children
is strictly prohibited.
Do not touch the flue gas exhaust terminal (if
present) due to the high temperatures it can
reach.
For safety purposes, check that the concentric
air intake/flue exhaust terminal (if fitted), is
not blocked.
If temporary shutdown of the boiler is required,
proceed as follows:
a) drain the heating system if anti-freeze is not
used;
b) shut-off all electrical, water and gas supplies.
In the case of work or maintenance to structures
located in the vicinity of ducting or devices
for flue extraction and relative accessories,
switch off the appliance and on completion of
operations ensure that a qualified technician
checks efficiency of the ducting or other devices.
Never clean the appliance or connected parts
with easily flammable substances.
Never leave containers or flammable substances
in the same environment as the appliance.
• Attention: the use of components involving use
of electrical power requires some fundamental
rules to be observed:
- do not touch the appliance with wet or moist
parts of the body; do not touch when barefoot;
- never pull electrical cables or leave the
appliance exposed to atmospheric agents (rain,
sunlight, etc.);
- the appliance power cable must not be replaced
by the user;
- in the event of damage to the cable, switch off
the appliance and contact exclusively qualified
staff for replacement;
- if the appliance is not to be used for a certain
period, disconnect the main power switch.
2.3 CONTROL PANEL.
Key:
1 - Reset Button
2 - Stand-by / Off / Summer / Winter
button
3 -* Key used to increase the
DHW temperature setting.
4 -* Key used to decrease the
DHW temperature setting.
5 - Key ( ) to increase the system water
temperature
6 - Key ( ) to reduce the system water
temperature
7 - Boiler manometer
8 -* DHW production phase functioning*
active
9 - Boiler connected to remote control
(optional)
10 - Flame presence symbol and relative
output scale
11 - Operation with external temperature
probe active (optional)
12 - Room central heating active phase
functioning
13 - Operation in winter mode
14 - Operation in summer mode
15 - Boiler in Stand-by mode
16 - Temperature and error code display
17 - Boiler in block does not require release
via “Reset” button
* N.B.:
(when the boiler is connected to an
external cylinder)