![Immergas Magis Combo 10 Скачать руководство пользователя страница 54](http://html.mh-extra.com/html/immergas/magis-combo-10/magis-combo-10_instructions-and-warnings_2047990054.webp)
54
3.31 PARAMETERS FOR FILLING THE
PACKAGE FICHE.
Should you wish to install an assembly starting
from the Magis Combo 5 - 8 -10 product, use the
package fiche shown in
Fig. 56
.
For correctly filling in, enter the figures shown
in tables
fig. 54 and 55
(as shown in the facsimile
package fiche
fig. 53
).
The remaining values must be obtained from
the technical data sheets of the products used to
Facsimile for filling in the package fiche for preferential boiler space heaters.
make up the assembly (e.g. solar devices, inte-
gration heat generator, temperature controllers).
Use board
Fig. 56
for “assemblies” related to
the central heating function (e.g.: heat pump +
temperature controller).
N.B.:
since the product is standard supplied with
a temperature controller, the package fiche must
always be completed.
53
Room central heating seasonal energy efficiency of the heat pump
1
%
Temperature control
From temperature
control board
Supplementary boiler
From boiler board
Room central heating seasonal energy efficiency in colder and hotter climate conditions
The energy efficiency of the set of products indicated in this sheet may not reflect the actual energy
efficiency after installation since such efficiency is affected by additional factors, such as the heat loss
in the distribution system and the size of the products compared to the size and features of the building.
Room central heating seasonal energy efficiency of the assemble in average
climate conditions
Room central heating seasonal energy efficiency class of the assemble in average
climate conditions
Solar contribution
From the board of the solar device
Class I = 1 %, Class II = 2 %,
Class III = 1.5 %, Class IV = 2 %,
Class V = 3 %, Class VI = 4 %,
Class VII = 3.5 %, Class VIII = 5 %
2
%
+
3
%
-
Seasonal central heating energy efficiency of the room
(%)
( - ‘I’ ) x “II” =
4
5
%
%
+
Dimensions of the
manifold (in m
2
)
Volume of the
tank (in m
3
)
Efficiency of the
manifold (in %)
Classification of the
tank
A* = 0.95, A = 0.91,
B = 0.86, C = 0.83,
D-G = 0.81
( ‘III’ x + ‘IV’ x ) x 0.45 x ( / 100) x =
%
%
5
5
‘I’
Colder:
- ‘V’ =
Hotter:
+ ‘VI’ =
G
F
E
D
C
B
A
A
+++
A
++
A
+
< 30 % ≥ 30 % ≥ 34 % ≥ 36 % ≥ 75 % ≥ 82 % ≥ 90 % ≥ 98 % ≥ 125 %≥ 150 %