16
7
22
B
MP
EFS
RP
21
23
RP
UCS
B
B
RP
MP
- Proceed with the hydraulic connections of the kit (Fig. 7).
- Connect all the pipes according to the following sequence,
taking care to interpose the flat gaskets present in the kit,
RP - MP (long) - UCS - RP (short) - EFS pipe.
- Connect the two solar system pipes to the specially prepared
fittings, using one of the pre-cut slots (B).
- Connect the silicone pipe (21) to the safety valve fitting and
insert it into the tank (23).
- Insert the solar tank probe (22) in its seat.
- Reopen the cold water inlet and restore power to the system.
