Immergas 3.030072 Скачать руководство пользователя страница 5

5

General warnings

All Immergas products are protected with suitable transport packaging. 
The material must be stored in a dry place protected from the weather.
The instruction booklet is an integral and essential part of the product and must be given to the 

new user in the case of transfer or succession of ownership.
It must be stored with care and consulted carefully, as all of the warnings provide important safety 

indications for installation, use and maintenance stages.
This instructions manual provides technical information for installing Immergas water heaters. As 

for the other issues related to water heater installation (e.g. safety in the work site, environment 

protection, injury prevention), it is necessary to comply with the provisions of the regulations in 

force and the principles of good practice.
In compliance with legislation in force, the systems must be designed by qualified professionals, 

within the dimensional limits established by the Law. Installation and maintenance must be 

performed in compliance with the regulations in force, according to the manufacturer's instructions 

and by professionally qualified staff, intended as staff with specific technical skills in the system 

sector, as envisioned by the Law.
Improper installation or assembly of the Immergas appliance and/or components, accessories, kits 

and devices can cause unexpected problems for people, animals and objects. Read the instructions 

provided with the product carefully to ensure proper installation.
Maintenance must be carried out by skilled technical staff. The Authorised After-Sales Service 

represents a guarantee in terms of qualifications and professionalism.
The appliance must only be destined for the use for which it has been expressly declared. Any other 

use will be considered improper and therefore potentially dangerous. 
If errors occur during installation, operation and maintenance, due to non-compliance with 

technical laws in force, standards or instructions contained in this book (or however supplied by 

the manufacturer), the manufacturer is excluded from any contractual and extra-contractual 

liability for any damage and the appliance warranty is invalidated. 

Содержание 3.030072

































Отзывы: