2017-05-30
TRIME
®
-PICO IPH Version 2_0
Page 39
18
Savety Notes
In this documentation, text points are highlighted, which require special attention.
DANGER:
The Warning Triangle with the exclamation mark warns you against per-
sonal injury or property damage.
Intended Use
Sensors and measuring systems of IMKO GmbH may only be used for the purpose de-
scribed, taking into account the technical data. Misuse
and use of the e
quipment other than
for its intended purpose
are not eligible.
The function and operational safety of a sensor or
measuring system can only be guaranteed if the general safety precautions, national regula-
tions and the special safety instructions in this operating manual are observed during use.
The moisture sensors and measuring systems of IMKO GmbH are used to measure moisture
according to the measuring purpose and measuring range defined and defined in the tech-
nical data. Only adherence to the instructions described in the manual is regarded as intend-
ed use. The manual describes the connection, use and maintenance of IMKO sensors and
IMKO measuring systems. Read the manual before connecting and operating a sensor or
measuring system. The manual is part of the product and must be kept close to the sensor or
measuring system.
Impairment of safety
The sensor or the measuring system has been designed and tested in accord-
ance with EN 61010 safety regulations for electronic measuring instruments
and has left the factory in a safe and safe condition. If the sensor or the meas-
uring system can no longer be operated safely, it must be put out of operation
and secured by means of marking before further commissioning. In case of doubt, the sensor
or the measuring system must be sent to the manufacturer or his contractual partner for re-
pair or maintenance.
Modifications
For safety reasons, it is not permitted to carry out any modifications or modifi-
cations to the sensor or the measuring system without the consent of the man-
ufacturer. The opening of the sensor or hand-held meter, adjustment and re-
pair work, as well as all maintenance work other than the work described in the
manual may only be carried out by a specialist authorized by IMKO. The sensor or the
measuring system must be disconnected from the power supply before installation or
maintenance work. Do not open or repair the hand-held unit and the power supply!
Hazard Warnings
Danger due to improper operation. The sensor or the measuring system may
only be operated by instructed personnel. The operating personnel must
have read and understood the operating instructions.
