TRIME
®
-PICO T3/IPH44 IPH50 Version 2_0
2017-05-30
Page 24
Inserting TRIME-PICO- T3/IPH44 into the TECANAT Tube
When you are going to work with your TRIME-T3 tube access probe:
Press the spring mounted wave-guides to the probe body when you insert the T3 probe into the
tube.
Thereby you avoid ripping off the spring mounted wave-guides.
Depth markers (see picture right) are fixed along the cable in 1m steps from
the measurement centre. The marker ears are positioned in direction of the
oriented measurement field (see p.7)
Please note
Should you use new T3 probes (eight wave-guiding plates instead of two) in old GFK tubes, we
advice to carefully chamfer the inner top side of the GFK tube. Thereby you avoid ripping off
the spring mounted wave-guides.
