manualshive.com logo in svg

IMKO Trime-GW, Руководство по эксплуатации

Поделиться
Скачать
IMKO Trime-GW Скачать руководство пользователя страница 22

 

3.3.1

 

Monitoring during grain delivery 

The TRIME

®

-GW presents a means of continually measuring the moisture of the grain while it is being 

delivered. This provides a moisture profile that can be recorded by a PC or a line printer. A display unit 
can be connected as well for showing the values at any given moment. Legal regulations prevent TRI-
ME

®

-GW being used instead of  instruments that have been officially calibrated and authorised for 

goods traffic. The single measurements, usually based on very small samples, from such instruments 
are supplemented by the continual, considerably more representative range of measurements taken 
by the TRIME

®

-GW. This results in better quality control and enhances transparency. 

3.3.2

 

Manual control of the grain dryer 

In the case of manual or semi-automatic dryer-control systems, using the TRIME TRIME

®

--GW in 

conjunction with a display unit can significantly improve drying results. Connecting a line printer or a 
PC allows, in addition, the progression of drying to be documented and provides further potential for 
optimising drying. 

3.3.3

 

Automatic control of the grain dryer 

This involves connecting the TRIME

®

--GW to the controller’s actual-value input. It is ideal to use sev-

eral TRIME

®

-GW in this case. The highest level of drying efficiency can be achieved in automatic con-

trol systems. We would be glad to assist you in selecting the most suitable controller for your particular 
application. 

________________________________________________________________________________ 

22 

Содержание Trime-GW




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды