User Manual
SONO-MIX MINI Version 2_7
2017-05-12
Page 26
4.2. Analogue Output 0..10V with a Shunt-Resistor
There are PLC´s which have no current inputs 0..20mA, but voltage inputs 0..10V. With the help of a
shunt resistor with 500 ohm (in the delivery included) it is possible to generate a 0..10V signal from the
current signal 0..20mA. The 500 ohm shunt resistor should be placed at the end of the line resp. at the
input of the PLC. Following drawing shows the circuit principle.
4.3. Connection diagram with SONO-VIEW
