IMI Onyx NX-10, Руководство по эксплуатации

Страница: 24 / 38

18 ONYX OPERATION MANUAL
Log Interval
Select the Log Interval function to set the desired time
interval, in Minutes, between recorded data points.
The Factory Default Log Interval is –
000 – Minutes,
which is the OFF state and no logging will occur.
Available interval range is 000–999 Minutes(approx.
16.5 Hours), meaning one log event will be recorded
every 16.5 Hours.
Note : Very Short Log Intervals may severely impact
battery state-­‐of-­‐charge, and will use available Flash
Memory space more quickly, requiring more frequent
USB Data Transfers.
If you were to log a measurement each Minute, you
would be able to collect data for approximately two
days. A useful way to view selection of log intervals is to
consider your rate of travel; whether you are on foot,
bicycle, auto or train. If you’re examining an area by
foot, you’ll cover much less territory in the one Minute
interval than if you were on the Bullet Train and, as you
review your data, each logged event will represent a
much smaller physical area than it would if traveling at
higher speeds.