44
Delete a Program:
this page allows you to delete a preset already stored in the DEQ-230
memory:
By pressing the ENTER button and rotating the “PM2” or “PM3” encoder, it is possible to scroll
through the previously saved presets and the available empty locations (identified by “Empty
Memory”).
If no user presets are stored, the “Delete a Program” screen will show empty memory
locations for all 1-24 presets as shown in the example below for location 10:
If Presets are available they will be shown in the “Delete a Program” page as follows:
By using the “PM2” or “PM3” encoder it is possible to select a preset to be deleted.
Pressing the “ENTER” button on a selected preset will bring up the “
[Enter] to Delete.
” page
showing the selected preset.
For example, if we want to delete the preset 10, “Velvet Club”, the screen will be the
following:
Confirming the deletion by pressing “ENTER” again, will force the DEQ-230 to erase the
selected preset and the following transitory screen will appear:
Once the preset is deleted, the above screen will disappear returning to the following screen:
Note
: At any time it is possible to quit the deleting action by pressing the “ESC” button.
Delete a Program
10: Velvet Club
[ENTER] to Delete.
10: Velvet Club
Deleting Program......
10: Velvet Club
PROGRAM UTILITY
-- Delete a Program --
Delete a Program
10: Empty Memory
PROGRAM UTILITY
-- Delete a Program --
