IMG STAGELINE DEQ-230, Руководство пользователя

Страница: 37 / 61

37
9. Output [x] [Name] PEQ/SHV - 1/30
1.00kHz BW/SHV_Slope=1.00/up to -12dB +0.0dB (when the filter's gain = 0.0dB ONLY, through the PM2 it is possible to chose
and select between a Bell or a Shelving filter.)
If through the PM2, being the filter's gain = 0.0dB,
has been selected a Bell filter, just defining its Bandwidth
BW to be greater then 0, then the Bell filters can be set by
the following parameters
9.1 Output [x] [Name] EQ-X (up to 30 filters available)
-> 1.00kHz BW=1.00 +0.0dB [Freq.] 20Hz [BW] 0.05 [Amp.] -15.0 dB
: : :
20kHz 3.00 +15.0 dB
If through the PM2, being the filter's gain = 0.0dB,
has been selected a Low Shelving filter, just defining its
Slope (1
st
or 2
nd
order available, -6dB or -12dB), then the
Low Shelving filter can be set by the following parameters
9.2 Output [x] [Name] EQ-X (up to 30 filters available)
-> 1.00kHz (-6/-12)LoSh +0.0dB [Freq.] 20Hz PM2 N/A [Amp.] -15.0 dB
: :
20kHz +15.0 dB
If through the PM2, being the filter's gain = 0.0dB,
has been selected a High Shelving filter, just defining its
Slope (1
st
or 2
nd
order available, -6dB or -12dB), then the
High Shelving filter can be set by the following parameters
9.3 Output [x] [Name] EQ-X (up to 30 filters available)
-> 1.00kHz (-6/-12)HiSh +0.0dB [Freq.] 20Hz PM2 N/A [Amp.] -15.0 dB
: :
20kHz +15.0 dB
10. Output
[x] [Name] Gain
Volume = + 0.0 dB
-> Volume = + 0.0 dB PAR1 N/A -12 dB Same as PAR2
:
+6 dB
ENTER
ESC
ENTER
ESC