5.3.2 Adjusting the start address
To be able to operate the spotlight with a light con-
troller, adjust the DMX start address for the first
DMX channel. If e. g. address 17 on the DMX con-
troller is provided for controlling the red LEDs,
adjust the start address 17 on the spotlight. Then
the other DMX functions of the spotlight are auto-
matically assigned to the following addresses (in
this example 18, 19, 20 and 21). The address 22
could be used in this example as the next possible
start address for the following DMX-controlled unit.
1) Press the button FUNC (6).
2) Select the function
with the button UP or
DOWN and confirm with the button ENT. The
display (5) shows
and behind it the present
DMX start address flashing.
3) Use the button UP or DOWN to adjust the
desired start address and confirm with the but-
ton ENT.
5.3.3 DMX control
To be able to operate the spotlight with the DMX
controller, the display must show and behind it the
start address. If not, make the steps described in
chapter 5.3.2 to adjust the start address. To indi-
cate reception of control signals, the flashes on
the display.
If the display shows
, the spotlight is in the
DMX control mode but no DMX control signal is
present at the jack DMX input (12).
6 Cleaning the Unit
The plastic pane in front of the LEDs should be
cleaned at regular intervals from the outside,
depending on impurities caused by dust, smoke or
other particles. Only this will ensure that the light is
radiated at maximum brightness.
For cleaning,
disconnect the mains plug from the socket.
Only
use a soft, clean cloth and a mild detergent. Then
wipe the plastic pane dry.
For cleaning the other parts of the housing, only
use a soft, clean cloth. Never use any fluid; it may
leak into the unit and cause damage.
7 Specifications
Light source: . . . . . . . . . . 167 LEDs
Red: 43, green: 44,
blue: 40, white: 40
Diameter: . . . . . . . . . . . 10 mm
Beam angle: . . . . . . . . . 25°
Power supply: . . . . . . . . . 230 V~ / 50 Hz
Power consumption: . . . . 20 VA max.
Ambient temperature: . . . 0 – 40 °C
Dimensions: . . . . . . . . . . . 270 × 210 × 100 mm
Weight: . . . . . . . . . . . . . . 2.2 kg
7.1 DMX channels
Subject to technical modification.
DMX value
Function
Channel 1
0 – 255
basic brightness of the red LEDs
Channel 2
0 – 255
basic brightness of the green LEDs
Channel 3
0 – 255
basic brightness of the blue LEDs
Channel 4
0 – 255
basic brightness of the white LEDs
Channel 5
0 – 7
light off
8 – 190
dimmer dark
→
bright
colour mixing via channel 1 – 4
191 – 200
music-depending colour change
201 – 247
stroboscope slow
→
fast
colours and brightness via channel 1 – 4
248 – 255
no stroboscope
colours and brightness via channel 1 – 4
11
GB
All rights reserved by MONACOR
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual
may be reproduced in any form or by any means for any commercial use.
