IMG STAGE LINE PARL-40DMX, Инструкция по эксплуатации

Страница: 13 / 44

6.3.2 Adjusting the number
of the DMX channels
To be able to operate the PARL-40DMX with a light
controller, the DMX start address (
chapter
6.3.3) and the number of the DMX channels have
to be adjusted. The number of the DMX channels
depends on the functions required and possibly on
the number of the control channels available at the
light controller. Please see fig. 4 about the functions
which are possible in each case and select the
number accordingly:
1) Press the button MENU repeatedly until the
indication on the display does not change any
more. The display now shows the operating
mode (
fig. 1 on the very left).
2) Press the button
▲
or
▼
repeatedly until the dis-
play shows .
3) Press the button ENTER. The display shows the
present adjustment:
= 3 channels, … = 4 … 8 channels
4) Adjust the number with the button
▲
or
▼
.
6.3.3 Adjusting the DMX start address
To be able to operate all DMX units separately
which are connected to the light controller, each
unit must have its own start address. To control the
first DMX channel of the PARL-40DMX by the light
controller e. g. via the DMX address 17, adjust the
start address 17 on the PARL-40DMX. All further
DMX channels of the PARL-40DMX are then auto-
matically assigned to the addresses following it.
Example when using the start address 17:
DMX address assignment of the PARL-40DMX when
using start address 17
1) Press the button MENU repeatedly until the indi-
cation on the display does not change any more.
2) Press the button
▲
or
▼
repeatedly until the dis-
play shows .
3) Press the button ENTER. The display now
shows and a number between 1 and 512.
4) Adjust the start address with the button
▲
or
▼
.
The spotlight can now be operated with a light
controller.
Note: A point flashes on the display when the spotlight
receives DMX signals.
6.3.4 DMX channels and functions
DMX channels
Channel
number
DMX
channel
DMX
value
Function
3
1 000 – 255 colour
2 000 – 255 colour saturation
3 000 – 255 brightness
4
1 000 – 255 brightness of red
2 000 – 255 brightness of green
3 000 – 255 brightness of blue
4 000 – 255 brightness of white
5
1 000 – 255 dimmer
2 000 – 255 basic brightness of red
3 000 – 255 basic brightness of green
4 000 – 255 basic brightness of blue
5 000 – 255 basic brightness of white
6
1 000 – 255 dimmer
2 000 – 255 basic brightness of red
3 000 – 255 basic brightness of green
4 000 – 255 basic brightness of blue
5 000 – 255 basic brightness of white
6
000 – 009 stroboscope off
010 – 225 stroboscope slow fast
8
1 000 – 255 dimmer
2 000 – 255 basic brightness of red
3 000 – 255 basic brightness of green
4 000 – 255 basic brightness of blue
5 000 – 255 basic brightness of white
6
when channel 7 = 000 – 015
000 – 009 stroboscope off
010 – 255 stroboscope slow fast
when channel 7 = 016 – 223
000 – 255
colour sequence or stroboscope
slow fast
7
000 – 015 control via channels 1 – 6
016 – 031 colour sequence 1 with crossfading
032 – 047 colour sequence 2 with crossfading
048 – 063 colour sequence 3 with crossfading
064 – 079 colour sequence 4 with crossfading
080 – 095 colour sequence 5 with crossfading
096 – 111 stroboscope
112 – 127 colour sequence with fading in / out 1
128 – 143 colour sequence with switching over 1
144 – 159 colour sequence with switching over 2
160 – 175 colour sequence with fading out
176 – 191 colour sequence with fading in
192 – 207 colour sequence with fading in / out 2
208 – 223 colour sequence 6 with crossfading
224 – 239 music control, white light
240 – 255
music control with
changing colours
8 000 – 255 sub-address, see chapter 6.3.5
Number of the
DMX channels
Addresses
for the
PARL-40DMX
Next possible start address
for the
following DMX unit
3 17 – 19 20
4 17 – 20 21
5 17 – 21 22
6 17 – 22 23
8 17 – 24 25
13
GB