iMettos B10, Инструкция по эксплуатации, Страница: 12 / 18

11
Note: When the cage assembly is in the closed position, a stop will prevent it from rotating in an anticlockwise
direction.
• Loose the screw. Once done, you can then remove the cage.
8.4. TO REMOVE THE REAR SPLASH SHIELD
The rear splash shield should by regularly inspected and cleaned when neccessary. This should be performed by a suitably
trained supervisor or maintenance department at least once a month. The splash shield can be either cleaned in either a
bowl of hot soapy water or a dishwasher.
• Ensure that the bowl is in the down position. Remove the bowl, guard cage and agitator as described previously in
section 8.3.1.
• Using a suitable bladed screwdriver, remove the 3 retaining screws securing the drip cup to the mixer. NOTE: ensure
that you have a firm grip on the shield whilst removing the screws.
• The drip cup can be carefully lowered away from the machine. Take care not to damage the paintwork of the mixer.
• Wipe any signs of grease from the drip cup first before washing.
• Refit the rear splash shield in reverse order once done, ensuring the screws are securely tightened.
9. MACHINE ILLUSTRATION:
If you want to replace parts, you can give us your requirement referring to the parts list below