GB
USE
!"
Extract the filtering cartridge (4) from the pre-filtering container (5) with the aid of the
relevant ring and rest it on a clean surface [Fig. L].
!"
Rinse the pre-filtering container (5) and the jug (6).
!"
Dry with a clean, dry cloth.
!"
Insert the filtering cartridge (4) inside the pre-filtering container (5) making sure it
adheres perfectly to the edges [Fig D].
!"
Insert the pre-filtering container (5) into the jug (6) [Fig E].
!"
Close with the lid (1) [Fig F].
!"
Fill the pre-filtering container with water (5) through the filling hatch (3) [Fig G].
!"
Allow water to flow into the jug (6) through the filtering cartridge (4). The operation may
require from three to five minutes [Fig H].
!"
Use the filtered water.
REPLACING THE FILTERING CARTRIDGE
!"
To guarantee excellent performance, replace the filtering cartridge (4) after having
filtered 120 litres of water (equal to an average of 4 litres a day for 30 days) and always
after one month from activation.
!"
The jug has an electronic LED (2) that indicates when a month has passed from
activation. With the passing of time, the electronic LED bars (2) switch-off progressively
until they disappear. Therefore the “
” signal will appear on the display to signal the
necessity to replace the filtering cartridge (4) [Fig M].
!"
Extract the filtering cartridge (4) used by the pre-filtering container (5) with the aid of
the relevant ring [Fig. L].
!"
Dispose of the filtering cartridge (4) according to that indicated in the DISPOSAL
chapter.
!"
Wash the pre-filtering container (5) and jug (6) and the lid (1) according to that described
at the start of the PRELIMINARY PHASES BEFORE USE chapter.
!"
Repeat the operations in the PRELIMINARY PHASES BEFORE USE chapter in
paragraphs:
!"
ACTIVATION OF THE ELECTRONIC LED
!"
PREPARING THE FILTERING CARTRIDGE
!"
ACTIVATING THE FILTERING CARTRIDGE.
USEFUL ADVICE
!"
Wash the pre-filtering container (5), the jug (6) and the lid (1) according to that
described at the start of the PRELIMINARY PHASES BEFORE USE chapter, at least
once a week.
!"
If the product is not used for several days, remove the filtering cartridge (4) and keep it
in the fridge. Before using the product again, repeat the operations in the ACTIVATION
OF THE FILTERING CARTRIDGE paragraph (PRELIMINARY PHASES BEFORE USE
chapter).
!"
The electronic LED (2) has duration of about 2 years. For replacement, take the lid (1)
to the Imetec customer after-sales service.
12
