EN
10
• The power cable must always be fully unwound to prevent hazardous
overheating.
SYMBOLS
Warning
ON/OFF switch
Prohibited
Hard floors
Protection class II
Carpets
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES (Fig. A)
Refer to Figure [A] in the illustrative guide to verify your appliance equipment. All the figures
are on the cover pages of these instructions for use
1.
Handle
2.
Manual cable winding system
2A Turning upper cable hook
2B Fixed lower cable hook
3.
Fastening screw
4.
Power cable with plug
5.
Combination carpet/floor brush
5A Brush position toggle switch
6.
Suction inlet
7.
Dust bag compartment cover
8.
Dust bag compartment opening lever
9.
Dust collection system
9A. Dust bag guides
9B. Dust bag
9C. Safety interlock
9D. Motor protection filter
9E. Filter guides
10.
ON/OFF switch
11.
Dust bag full indicator
ASSEMBLY
• Loosen the fastening screw (3) of the handle (1) and remove it.
• Attach the handle (1) to the body of the appliance, taking care to assemble it correctly.
• Insert the fastening screw (3) and tighten it clockwise [Fig. B1].
• Select the combination brush (5) and connect the element to the intake connection (6).
ACCESSORIES
Combination carpet/floor brush (5)
Adjust the combination brush according to the type of flooring, using the toggle switch (5A) [Fig. C1]:
• toggle switch (5A) position A
(extended bristles): for hard floors [Fig. C1-A];
• toggle switch (5A) position B
(retreated bristles): for rugs and carpets [Fig. C1- B].
USE
Fully unwind the power cable (4). To do so, turn the upper cable hook (2A) downwards [Fig. D1].
Using the vacuum cleaner with the cable fully or partly wound involves an
overheating hazard!
