EN
16
www. imetec.com
Tenacta Group S.p.A. Via Piemonte 5/11 24052 Azzano S. Paolo (BG) ITALY
Tel. +39.035.688.111 Fax +39.035.320.149
M
I0
0
0
9
2
8
1
0
1
2
(M
M
YY)
Patches remain wet while ironing.
Sometimes patches remain wet after
being steam ironed as the steam
condenses on the ironing board. Pass
the iron a number of times on the wet
patches without dispensing steam. If
the lower part of the ironing board is
wet, dry it with a dry cloth.
Use a mesh ironing board to prevent the
steam from condensing on the ironing
board.
The iron cannot be placed
in an upright position.
The iron has been designed to be
set horizontally.
Place the iron on the iron resting
mat (9).
DISPOSAL
The product is packaged in recyclable materials. Dispose of it in compliance with the
environmental protection standards.
The appliance must be disposed of appropriately, in compliance with European
Standard 2002/96/EC. The recyclable materials contained in the appliance must be
collected to prevent environmental pollution. For further information contact the local
waste authority or the appliance retailer.
ASSISTANCE AND WARRANTY
To request repairs or purchase spare parts, please contact IMETEC’s authorised customer
service centre on the Toll-Free Number below or via the website. The appliance is covered
by the manufacturer’s warranty. For details, read the attached warranty sheet. Failure to
comply with the instructions for use and maintenance provided in this manual will render the
manufacturer’s warranty null and void.
