IMET BS 300/60 SHI, Инструкция по эксплуатации

Страница: 11 / 50

ORIGINÁLNÍ NÁVOD K POUŽITÍ
BS 300/60 SHI
11
9 - FITTINGS ASSEMBLING
The necessary information for the installation are given along with the related accessories. Anyway you can find here
short description of several products.
Loading Roller Tables - To install them rightly, it is necessary first of all to level and fix the machine.
To level and line up the loading roller table refer to the work table and to the supporting back jaws. Start from the one
that is nearest to the feeder. For the longest workpieces fix the floor stand to the floor and recycle the coolant
transported by the workpieces that have to be cut.
On the unloading side you can choose to use the roller table with manual measuring system (RTM) or the one with
digital measuring system (RTD).
Electronic Inverter for blade speed (ESC)
– it can be installed while manufacturing the machine, not later. It allows to
have variable blade speed. The Inverter box is fixed to the floor stand before placing the saw on it. An handle
placed on the control box allows to vary the blade speed, which is shown either in M/Min or FPM. A green light on the
control panel, when off, shows that the maximum power supply threshold has been exceeded; thus the motor stops.
This can happen for a number of reasons: excessive cutting pressure, unsuited blade speed, and so on.
To start working again, turn off the machine, wait one minute and then turn it on again.
Foot pedal - supplied as optional. It is connected to the switch placed on the back side of the panel. By pushing it, the
machine starts.