IMET Spa BASIC 300 PLUS SHI, Инструкция по эксплуатации

Страница: 6 / 66

INSTRUCTIONS FOR USE
BS300 Plus SHIing ED.2010 rev.00
6 - 66
5 4 - GUARANTEE NORMS
I.ME.T. offers a wide range of sawing machines and accessories, destined to who buys/uses them as part of
a commercial or professional activity.
The manufacturer grants that this product has been strongly controlled and that there are no defects in the
used and working materials for a period of 12 months from the date of the delivery note.
The Italian law D.L. n° 24 issued on 02/02/2002 and valid since 23/03/2002 (which carries out the European
Directive 1999/44/CE) indicates different terms only for convenience products for private use.
If the user points out some defects to the manufacturer during the warranty time, the manufacturer will
replace the components that are considered faulty.
In case of reparation of the machine during the warranty time the shipment will be accepted only if the
delivery is Free Destiny (that is the freight costs are supported by the owner of the machine), and the return
of the machine to the customer is considered EX WORKS.
If the manufacturer is not able to replace a component within an acceptable time, both companies
(manufacturer and user) will reach an agreement to satisfy completely the needs of the user.
The a.m. warranty is not valid in case of accidental damages, or defects provoked by a wrong use or
maintenance of the machine, by variations made on the equipment, or by the use of the machine in a place
not corresponding to the indicated environmental specifications.
4.1 - The manufacturer does not offer further warranties, written or spoken, explicit or implicit of its products
and does not offer implicit warranties on suitability for particular uses not foreseen by the agreement or on
chances of selling them.
The a.m. limitations and exclusions can also be not applicable in Countries, where there are no implicit limits
of warranty time on the products. Anyway each implicit warranty is limited to a time of 12 months from the
date of the delivery note.
4.2 - The date of manufacture, which can be evinced from the serial number placed on the machine, is a
necessary reference for warranty, after-sale assistance and product identification.
Each modification of the products, especially the installation of safety devices, will relieve the manufacturer of
any kind of responsibility.
The parts most subject to rapid and continuous wear are not included in the warranty (for example:
transmission belts, gaskets, oil, blades, and so on).
For electrical, electronic and hydraulic equipments and for all other equipment having its own specifications
(whereas the name of the manufacturer is known), the manufacturer gives to the user the same warranty
received by the primary manufacturer of these parts.
4.3 - The components replaced during the assistance provided by the manufacturer have a
warranty of 6
months from the installation date indicated on the Technical Service paper, one copy of which is given to the
owner.