IMER
U.S.A. Inc.
- 5 -
WORKMAN 350 II MULTIMIXER
IMPORTANT NOTES AND ADVICE
Do's and Don'ts on the Safe Use
of the Workman 350 II
In the interest of safety, whoever uses the Workman 350 II should first read this manual and become
familiar with all of the important safety notes. Failure to follow this advice may result in injury to
yourself and others.
WHAT TO DO !
- Carefully read and understand these instructions before operating the mixer.Read the Honda manual too.
- Always turn off the engine and disconnect the spark plug wire before cleaning or maintaining the mixer.
Mixers powered by electric motors should be unplugged from their power source before servicing is
performed.
- Make sure the safety guards are always in place.
- When using the machine always wear safety boots with reinforced toe-caps, safety glasses, gloves,
hard hat, and clothing with the appropriate fit. Loose clothing can cause injury should it become entangled
with the mixer.
- Practice starting and stopping the machine.
- Keep the mixer clean and free of debris build-up.
- Periodically inspect your mixer for abnormal wear or damage.
- Always stop the engine before adding fuel.
- Do not operate the mixer while under the influence of drugs or alcohol.
- Always operate the mixer on a level surface.
- When loading the Workman it is the best to pour your bagged material into a 5 gallon bucket then pour it
into the drum.
- It is much easier on your body and safer too to load the drum in this manner.
