FR
EN
ES
IT
RO
51
NOTE
If the high pressure washer still cannot start, please contact the IMER FRANCE dealer or the
nearest After-Sales Service to get information and to be instructed with measures to take.
THE PUMP IS MEETING THE FOLLOWING PROBLEMS:
•
No pressure rise;
•
Intermittent pressure;
•
Pressure jolt;
•
Low water flow;
1) The pump sucks up air.
1)
Control the delivery pipe. Make sure it is not
porous.
2) Input water is blocked.
2) Clean the input.
3) Unsuitable water supply.
3)
Provide a suitable water flow rate. Select
a water feeding pipe with a convenient
diameter (see section 5.1. Connection to the
water supply).
4) The input hose is pinched.
4) Eliminate the pinching.
5) Leak on the input hose.
5) Repair the leak.
6)
The strainer of the input hose (b) (Fig. B) of
the high pressure washer is blocked.
6)
Inspect and clean the strainer of the input
hose of the high pressure washer (b) (B)
7) Water temperature is over 30°C.
7) Provide a colder water supply.
8) The high pressure hose leaks or is blocked.
8)
Unclog the high pressure hose or replace it.
9) The gun leaks.
9) Replace the gun or the O-rings.
10) The nozzle is blocked.
10) Clean the nozzle.
THE DETERGENT CANNOT MIX WITH THE WATER JET:
1)
Siphoning pipe not immersed into the
detergent.
1)
Immerse the PVC pipe strainer device into
the detergent.
2) The PVC pipe strainer device is blocked.
2)
Clean or replace
the PVC pipe strainer device .
3) Nozzle in high pressure mode.
3) Select the low pressure mode.
NOTE
If the high pressure washer still cannot start, please contact the IMER FRANCE dealer or the
nearest After-Sales Service to get information and to be instructed with measures to take.
