IMCO Xtreme Advantage, Руководство по эксплуатации и ремонту

Страница: 4 / 13

Drive Oil Reservoir
1. Install water supply fitting with bolts and lock washers provided.
(Torque bolts to 45 in lbs).
2. Install optional water block off plate with bolts and lock washers pro-
vided. (Torque bolts to 45 in lbs).
CAUTION: When using optional block off plate provisions for water
flow through the drive is mandatory for drive cooling.
a. Remove or cut water supply hose in gimbal.
b. Route water to external water dump.
Oil hose connection
1. Connect the gimbal housing and drive oil reservoir tank together with
the hose and fitting provided.
IMPORTANT: Drive oil reservoir must be installed higher than the
oil fitting on gimbal. Run hose as straight as possible to avoid a low
section in the system.
2. Hose must be routed away from rotating shaft.
CAUTION: Do not over fill drive oil reservoir!
Drive Oil Reservoir
05 - 2013
05 - 2382
Page 2