IMC CRONOS-PL, Начало работы

Страница: 6 / 53

imc CRONOS-PL/-SL/compact - Getting Started, Version 5 R 7 - 2018-06-28 © 2018 imc Meßsysteme GmbH
6 General
Note
The EMC tests were carried out using shielded and grounded input and output cables with the
exception of the power cord. Observe this condition when designing your experiment to ensure high
interference immunity and low jamming.
1
If you are located outside Europe, please refer the appropriate EMC standards used in the country of operation.
FCC-Note
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules (CFR 15.105)
2
. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment on and off, the user is encouraged to try to correct the interference by one or more of the
following measures:
·
Reorient or relocate the receiving antenna.
·
Increase the separation between the equipment and the receiver.
·
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
·
Consult our imc hotline or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that
are not expressly approved by imc may void the user's authority to operate this equipment.
2
FCC - United States Federal Communications Commission
Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods
to maintain compliance with FCC Rules and Regulations.
Industrial Safety
We certify that imc CRONOS-PL/-SL/compact in all product configuration options corresponding to
this documentation conforms to the directives in the accident prevention regulations in "Electric
Installations and Industrial Equipment" (DGUV Regulation 3)
3
.
This certification has the sole purpose of releasing imc from the obligation to have the electrical
equipment tested prior to first use (§ 5 Sec. 1, 4 of DGUV Regulation 3). This does not affect
guarantee and liability regulations of the civil code.
3
Formerly BGV-A3
7