imc CRONOS-PL/-SL/compact - Getting Started, Version 5 R 7 - 2018-06-28
© 2018 imc Meßsysteme GmbH
50
Symbols and legend
6 Symbols and legend
Tips and recommendations
Note!
... highlights useful tips, recommendations and information for efficient and
trouble-free operation.
Reference
...indicates where to find more detailed or otherwise related information.
Drawings of the pin alignment
The number in each connection drawing is meant to be the correspondent LEMO pin.
Notes of caution
Warning notes are denoted in this manual by symbols. The notes begin with a signal phrase
characterizing the extent of the danger. Be certain to observe these notes carefully to avoid accidents
and harm to persons and equipment.
Caution!
...indicated a potentially hazardous situation which could cause slight injury if not avoided.
Danger of electric shock!
... warns of danger from electrical voltages at the measurement object which are
conducted into the measurement inputs. The device itself does not produce dangerous
voltages.
Caution!
...refers to potentially hazardous situations which can cause equipment damage if not
avoided.
Symbols on your measurement device
Caution! Danger area!
Due to the insufficient space at the measurement inputs the calculation parameters can not
be stated nearby. Before starting consider the calculation parameters of the measurement
inputs in this manual.
Danger of electrical shock!
... points on both, the danger outgoing from the measurement source and on the danger at
the measurement inputs (e.g. HV modules) and dangerous voltage coming from the
measurement device (e.g. MIC-SUPPLY).
Recycling!
... points out, concerning WEEE guideline, that the product may not be thrown in the
domestic refuse. The product was brought into the market after 2005 August 13th.
