IMC Networks AccessEtherLinX, Руководство по эксплуатации

Страница: 8 / 24

4
About iConfig
iConfig is an in-band configuration utility that lets users quickly and easily complete
the first stages of SNMP configuration for SNMP-manageable devices. Tasks iConfig
can perform include:
• Setting the IP address, subnet mask and default gateway
• Defining the community strings and SNMP traps.
In addition to the above functions, iConfig offers an authorized IP address system and
access restriction to MIB groups supported by manageable devices. These extra
layers of security are purely optional and do not affect SNMP compatibility in any
way.
iConfig can also be used to upload new versions of the system software and new MIB
information. It also offers diagnostic capabilities for faster resolution of technical
support issues. iConfig version 1.3 or above MUST be used for PROM updates.
HubControl32 and previous versions of iConfig will not work.
iConfig works with the following platforms:
• Windows 98
• Windows NT
• Windows 2000
• Windows XP
The iView² CD shipped with the AccessEtherLinX includes iConfig. For information
regarding the use of iConfig, refer to the iConfig help file.
SNMP Management
SNMP management and iConfig are always through the AccessEtherLinX Uplink port.
This provides a higher level of security so end-users cannot access management, alter
settings, etc.
Assigning IP Information
In order for the AccessEtherLinX to allow for SNMP-management, the unit must be
assigned IP configuration information (e.g., IP address, subnet mask, etc.) using
iConfig via iView²; the unit’s serial port or DHCP (Dynamic Host Control Protocol).
In addition to assigning an IP address and subnet mask, the former two methods will
also allow users to create community strings, assign access rights, configure traps and
more. However, iConfig offers more options than serial port configuration.
After assigning an IP address, use iView² or another SNMP-compatible Network
Management System (NMS) to remotely configure, monitor and manage the
AccessEtherLinX.