IMB MB2003D-KS-1509P, Инструкция по эксплуатации

Страница: 18 / 27

14
The speed of lower tug, front tug and feed dog should be synchronized
3.Rear roller：Adjust the relative position between the nut and the right crank of the front
roller to ensure that the fabric is flat when the cutter is running
。
6.5 Position of upper and lower roller baffle
1.
Left inner baffle of front roller：Loosen the fixing screw ○
1
so that the bottom edge of the baffle
is close to the front roller, Prevent the thread end and waist head from being stuck by the roller
2. Cutter position：Loosen the fixing screw
○
2
and move the cutter device back and forth to
make the bottom edge of the lower cutter close to the lower roller
，Prevent the thread end and
waist head from being stuck by the roller。
○
1