IMB MB2003D-KS-1509P, Инструкция по эксплуатации

Страница: 11 / 27

7
5、Operating instructions
5.1 Preparation before operation
√ When the operator checks, the machine head should be in the stop state
√ Check that the stitches have been correctly fitted
√ Check whether the needle has been installed
√ Clean up the sundries on the machine table to ensure that there are no sundries
hindering the operation of the machine
√ Check that the eye guard is properly installed
5.2 Description of operation process
1 Start the device
Press the power switch To position 1，Power on the equipment，Select the
language in the 4.1 - (5) - a boot interface and enter the 4.1 - (5) - B monitoring interface。
2 Sewing
a. Straight：
Insert the waist head into the drawing barrel manually, then step on the 4.1 - (2)
pedal to lift the presser foot, insert the waist head above the cloth feeding teeth
(as shown in the figure on the left below), put down the presser foot, sew two
stitches, and then put on the pants piece (as shown in the figure on the right below),
step on the foot pedal to finish sewing。