l
When connecting to a DC power source,make suer to ob-
serve correct polarity -red to positive and black to negative.
Do not connect both power inputs to the charger at the
same time!
Plug your battery into the output power adapter cord.If you’re
charging a LiPo battery,plug its balance connector into the
matching balance port on the charger,too.
Depending on the power connector on your battery,you may
need to use an adapter or change the connector to match.
2
3
3
Use the information in this section to connect the B6 AC and
your battery.Failure to make the connections correctly can
result in damage to the charger and/or your battery.
Connect the charger to its power source, using either the AC
power cord or the DC power cord provided.When connected
to power, the charger will make a single audible tone and the
LiPo Status LED will illuminate green.
Plug the output power adapter cord into the output power
ports of the charger,making sure to observe correct polarity (
red to red and black to black)
1
LiPo Connection
NiMH Connection
